EM-Tec TS1 TEM标样-多孔碳膜
EM-Tec TS2 TEM标样-喷镀的铂/铱
这种混合标准样品为测试TEM状况提供了一种三合一的工具。这种混合标样包含多孔碳膜上的石墨化碳颗粒和金颗粒。结合The combined test specimen consists of graphitised carbon particles on a holey carbon which are shadowed with gold. Combines astigmatism test using perforated carbon film with resolution tests using graphitised carbon black and fine gold particles. The evaporated gold forms small polycrystalline islands in which lattice fringes can be resolved. The combined test specimen can also be used for contamination measurements by noting the carbon depositing rate within the holes of the gold film. Mounted on a 300 mesh copper TEM grid
Oriented gold crystal provides plane spacing of 0.102, 0.143 and 0.204nm. Used for checking resolution, image quality, magnification and instrument stability in high resolution TEMs. The single oriented gold crystals produces a characteristic diffraction patterns. When the TEM is correctly setup, it should resolve the 0.102 nm (100 plane) planar spacing, 0.143 nm (220 plane) and the 0.204nm (200 plane). Since these are physical constants they can also be used for magnification calibration. Mounted on a 400 mesh Au TEM grid.
The aluminium film of around 30nm is used for calculating the value of the camera length. The small Al crystals provide a well defined diffraction pattern. The Al film is evaporated on a holey carbon on a 400 mesh Cu TEM grid.
A thin copper foil on an aluminium TEM grid provides well defined and separated lines of Al (K-line) and Cu (K- and L-lines) in an EDX spectrum. These lines can be used to calibrate the EDX spectrometer and to asses EDX detector efficiency. The carbon coated 60nm Cu foil is mounted on a 200 mesh aluminium TEM grid.
The finely dispersed thin gold particles on a carbon film provide an excellent high resolution TEM standard. The gold particle size distribution is normally in the 2nm to 9nm range. Image quality, magnification and instrument stability are readily determined. For resolution assessment, this standard offers a choice of crystalline orientation on static or low tilt stages. The thickness of the crystals can be calculated form the projected shape of the gold crystal. The background noise from the structure of the carbon support film helps in determining the operating transfer function.
EM-Tec TR2 TEM resolution standard graphitised carbon black
Graphitised carbon black provides a stable resolution standard for TEM resolution testing. The graphitised carbon black particles exhibit lattice planes following the contours of the particles. Lattice plane distance is 0.34nm. Supplied on a holey carbon film on a copper TEM grid